Wood Fencing Gallery 2
Garbage Enclosures using Pressure Treated Wood
The wood fence on the left is a garbage enclosure using 1' x 6' pressure treated wood mounted to 1-11/16" O.D. galvanized steel frame that is welded to steel posts. The pressure treated boards are attached using self tapping screws. A double gate is on the left side and a single gate is on the right.
Here is the front of the double gate. The gates are made of 1-11/16" schedule 40 aluminum to keep them strong, but lightweight for better operation.The pressure treated boards are held in place by a top and bottom steel channel and self tapping screws. 
Here is the back side of the double gate for the garbage enclosure. Notice that the gate is mounted about 1' off the ground. This was necessary to clear a change in grade. It also makes the gates easier to open in the winter since they can clear any snow or ice build-up.
Another example of an aluminum gate with pressure treated boards that are held in place by a top and bottom steel channel and self tapping screws. [Home] [Residential]
[Industrial] [Specialty
Products] [Farm Fencing] [Services]
[Gallery]
[Catalogues] [Specials]
[D-I-Y] [Specifications]
[FAQ's] [About Us] [Staff]
[Location] [Site Map]